Nec Lcd1530v Stopped Working My NEC MultiSync LCD1530V Monitor Is Not Working?
My NEC MultiSync LCD1530V monitor is not working? - nec lcd1530v stopped working
I'll connect to the computer, but said no video input.
|
Subscribe to:
Post Comments (Atom)
2 comments:
You connect the monitor to eat? Check for bent pins on the end.
Try another monitor if you can. If the second monitor works, then is the problem with the NEC. If you have another computer or laptop, connect the monitor. Follows the work now? The problem is now in the team. Graphics can be bad, try the video card. Because you are working in a team and to monitor it. My best estimate of the video card is bad or bent or loose bolts.
When the PC is not only what the OK sign of departure is not really, so no video signal. PC monitor is very good, but it is not. If you have a computer monitor or laptop mode are connected, try the Fn key and press F5 (or F7 key or w / monitor) icon.
If you know how to deal with inside the housing of the PC you can try a reset CMOS to play. CMOS reset jumper switch on the motherboard or by removing the CMOS battery (looks like a silver coin) for at least 30 seconds, then on again. Thus, while the PC is turned off.
Power Now on the PC. When it beeps, it should POST)-ad (text on a black screen. Press Del (or F1 or F2) to enter the BIOS menu. Load-test secure, save and exit. PC restarts and should be ok.
If the CMOS reset does not work, the problem could get worse. Get professionalAssistance.
Post a Comment